8. UNFOLDING THE WIND SHIELD
Installation:
•
Lift the wind shield upright from the center of the fire box, and expand
the wind shield side wings.
•
Place the tabs of the wind shield side wings into the small tab openings
near the front two corner of the firebox.
9. ASSEMBLING THE SIDE SHELF HANDLES
Parts Required:
Side Shelf Handles (#8)
2
x
4
x
Screw (#B)
Installation:
•
Assemble a side shelf handle to the front of the left side shelf, securing
with two screws, from the inside. Repeat for right side shelf.
10. PLACING THE GREASE CUP
Parts Required:
1
x
Grease Cup (#7)
Installation:
•
On the back of the grill, place the grease cup on the bottom of the
firebox, as shown in the illustration.
11. INSTALLING THE COOKING COMPONENTS
Parts Required:
Cooking Grids (#1)
3
x
1
x
Cooking Griddle (#2)
Installation:
•
Place the cooking grids, side-by-side, onto the ledges in the firebox.
Note 11A.
NOTE: To maintain the searing and grilling performance of your
cooking grids, regular care and maintenance Is required.
•
Place the cooking griddle on top of the cooking grids, or place on the
cart when not in use. Note illustration 11B.
12. INSTALLING THE IGNITION BUTTON BATTERY
Parts Required:
Battery (#C)
1
x
Installation:
•
Turn the ignition button cap counter-clockwise to remove it. Insert the
battery into the housing with the positive (+) terminal facing outward.
Screw the ignition button cap back into place to cover.
•
The unit is now completely assembled.
8
9
10
11A
11B
12
9