The Complementary Functions (Gong, Courtesy Light, Door Opener); The Attributes Of The Intrusion Inputs (And / Or Zones, And Inputs) - Urmet 1068 Série Mode D'emploi

2.4.3

The complementary functions (gong, courtesy light, door opener)

Complementary functions can be associated with the inputs.
The available functions are:

Gong
This auxiliary function is operative when the zones to which the input is associated are deactivated.
For example, in a shop the magnetic contact of the entry door could be configured as a Gong. The gong event emits
a buzzer signal from the keypad and activates the outputs configured as Gong.

Courtesy light with system deactivated
This auxiliary function is operative when the zones to which the input is associated are deactivated.
When the function is operational, when the input opens, if there are specialized outputs in the system such as
Courtesy light with at least one zone in common at the input, these will be piloted, for a time that can be configured
"Courtesy light Time" parameter.
using the

Courtesy light with system activated
This auxiliary function is operative when the zones to which the input is associated are deactivated.
When the function is operational, when the input opens, if there are specialized outputs in the system such as
Courtesy light with at least one zone in common at the input, these will be piloted, for a time that can be configured
using the "Courtesy Light Time" parameter. ".

Door opener
This auxiliary function is operative when the zones to which the input is associated are deactivated.
When the function is operational, when the input opens, if there are specialized outputs in the system such as Open
door with at least one zone in common at the entrance, these will be piloted for a configurable time ("Door Open
Time").
2.4.4

The attributes of the intrusion inputs (AND / OR zones, AND inputs)

The functioning of the anti-intrusion inputs can be further personalised by setting the attributes:

Common input, determines the belonging to more than one zone. Possible settings:
o
AND Zones: logically connect zones to which the input belongs to each other and the alarmi s generated only
if all the zones are armed.
o
OR Zones: logically connect zones to which the input belongs to each other and the alarmi s generated is at
least on zones are armed.

AND inputs, Logically connect two intrusion inputs with the same specialization between them and the alarm is
generated only if both are opened within a programmable time from each other (the first entry to be opened may
also have been closed in the meantime). The AND inputs can be used, for example, to reduce the possibility of
false alarms of sensors placed in critical areas.
DS1068-017 22 LBT20717