Technoline WS6462 Mode D'emploi page 39


The current indoor temperature/humidity/barometric pressure and the temperature/humidity trend (indoors) are
shown in the LCD display.

After successfully connecting with the outdoor sensor, the weather station can display the outdoor
temperature/humidity and the temperature/humidity trend (outdoor)

You may see the following displays:
The temperature/humidity is rising.
The temperature/humidity is remaining constant.
RF Transmission Procedure:

The weather station automatically starts receiving transmission from outdoor thermo sensor for outdoor temperature
& humidity after batteries inserted.

The outdoor sensor will automatically transmit temperature and humidity signal to the weather station after batteries
inserted.

If the weather station failed to receive transmission from outdoor sensor ("- -"display on the LCD), press and hold
"▼" button for 3 seconds to receive transmission manually. RF icon "
starts to receive the outdoor sensor.
The temperature/humidity is falling.
" flashes on the LCD，the weather station
39