Introduction - Ego Power+ PH1400 Guide D'utilisation

◾ ◾
Battery tools do not have to be plugged into an electrical outlet;
therefore, they are always in operating condition. Be aware of possible
hazards even when the tool is not operating. Take care when performing
maintenance or service.
◾ ◾
Remove or disconnect the battery pack before servicing, cleaning or
removing material from the product.
◾ ◾
Do not wash with a hose; avoid getting water in motor and electrical
connections.
◾ ◾
If situations occur that are not covered in this manual, use care and
good judgment. Contact the EGO Customer Service Center for assistance.
◾ ◾
Save these instructions. Refer to them frequently and use them to instruct
others who may use this tool. If you lend this tool to someone else, also lend
these instructions to them to prevent misuse of the product and possible injury.
NOTE: SEE YOUR POWER HEAD OPERATOR'S MANUAL FOR ADDITIONAL SPECIFIC

INTRODUCTION

Congratulations on your selection of the EGO POLE SAW ATTACHMENT. It has been
designed, engineered and manufactured to give you the best possible dependability
and performance.
Should you experience any problem you cannot easily remedy, please contact EGO
customer service center 1-855-EGO-5656.
This manual contains important information on to the safe assembly, operation and
maintenance of your product. Read it carefully before using the product. Keep this
manual handy so you can refer to it at any time.
SERIAL NUMBER _____________________
YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP THEM IN A
SAFE PLACE FOR FUTURE REFERENCE
SAVE THESE INSTRUCTIONS
SAFETY RULES.
POLE SAW ATTACHMENT — PSA1000
DATE OF PURCHASE _________________
9