Ego Power+ PH1400 Guide D'utilisation page 16

Tête d'alimentation au lithium-ion de 56 volts
Masquer les pouces Voir aussi pour PH1400:
Table des Matières

Publicité

4. Adjust the front-assist handle position between the rear handle housing and the
coupler on the power-head shaft (Fig. 4).
5. Tighten the four screws so that the handle cannot be rotated on the shaft.
WARNING:
Never operate the tool without the front-assist handle firmly in place.
16
56-VOLT LITHIUM-ION POWER HEAD—PH1400

Publicité

Chapitres

Table des Matières
loading

Table des Matières