Navigating Through The Menu; Main Menu List - Mitsubishi Electric PAR-30MAOA Manuel D'instructions

Navigating through the menu

Main menu list

Setting and display
items
Use to set the vane angle.
Select a desired vane setting from five different settings.
(Lossnay)
Use to turn ON/OFF the louver.
Select a desired setting from "ON" and "OFF."
Use to set the amount of ventilation.
Select a desired setting from "Off," "Low," and "High."
High power Use to reach the comfortable room temperature quickly.
Units can be operated in the High-power mode for up to 30 minutes.
Timer On/Off Use to set the operation On/Off times.
Time can be set in 5-minute increments.
timer
* Clock setting is required.
Auto-Off Use to set the Auto-Off time.
Time can be set to a value from 30 to 240 in 10-minute increments.
timer
Weekly timer Use to set the weekly operation On/Off times.
Up to eight operation patterns can be set for each day.
* Clock setting is required.
* Not valid when the On/Off timer is enabled.
* 1ºC/1ºF increments
Use to set the time periods in which priority is given to quiet
OU silent mode
operation of outdoor units over temperature control. Set the Start/
Stop times for each day of the week.
Select the desired silent level from "Normal," "Middle," and "Quiet."
* Clock setting is required.
Restriction Temp. Use to restrict the preset temperature range.
Different temperature ranges can be set for different operation modes.
range
* 1ºC/1ºF increments
Operation Use to lock selected functions.
The locked functions cannot be operated.
lock
Energy Auto Use to get the units to operate at the preset temperature after
saving return
Time can be set to a value from 30 and 120 in 10-minute increments.
* This function will not be valid when the preset temperature ranges are
restricted.
* 1ºC/1ºF increments
Schedule Set the start/stop times to operate the units in the energy-save
mode for each day of the week, and set the energy-saving rate.
Up to four energy-save operation patterns can be set for each day.
Time can be set in 5-minute increments.
Energy-saving rate can be set to a value from 0% and 50 to 90% in
10% increments.
* Clock setting is required.
18
Setting details Reference
page
22
25
27
29
31
34
37
39
41
44