Safety Information; Risk Of Electric Shock - SilverCrest SHC 240 A1 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32

Safety information

RISK OF ELECTRIC SHOCK

Connect the appliance only to mains power sockets supplying
a mains power voltage of 110 - 240 V ~ , 50/60 Hz .
To prevent accidents, have defective plugs and/or power
cables replaced immediately by an authorised specialist
technician or our Customer Service department .
Remove the plug from the mains power socket in case of
operating malfunctions and before you clean the appliance .
Always pull on the plug to disconnect the appliance from the
mains; never pull on the power cable itself .
Do not kink or crush the power cable, and route the cable
so that it cannot be stepped on or tripped over .
Make sure that the power cable does not become wet or moist
during use . Route the cable in such a way that it cannot be
crushed or damaged .
To prevent risks, stop using the appliance immediately if it is
damaged .
Do not wrap the power cable around the appliance, and
protect it from being damaged .
Do not use extension cables – they will make it difficult to
disconnect the appliance quickly in an emergency .
Never touch the appliance, the power cable or the power
plug with wet hands .
Never submerge the appliance in liquids or never allow
liquids to penetrate the appliance housing . Do not expose
the appliance to humidity and do not use it outdoors . If any
liquid gets into the housing, disconnect the appliance from
the mains power socket immediately and have it repaired
by a qualified technician .
18
 │ GB │ IE
SHC 240 A1

Publicité

Table des Matières
loading

Table des Matières