Safety Information - SilverCrest SHC 240 B2 Mode D'emploi

Safety information

RISK OF ELECTRIC SHOCK
Connect the appliance only to mains power sockets supplying
►
a mains power voltage of 110 – 240 V ∼, 50/60 Hz.
To prevent accidents, have defective plugs and/or power
►
cables replaced immediately by an authorised specialist
technician or our Customer Service department.
Remove the plug from the mains power socket in case of
►
operating malfunctions and before you clean the appliance.
Always pull on the plug to disconnect the appliance from the
►
mains; never pull on the power cable itself.
Do not kink or crush the power cable, and route the cable
►
so that it cannot be stepped on or tripped over.
Make sure that the power cable does not become wet or moist
►
during use. Route the cable in such a way that it cannot be
crushed or damaged.
To prevent risks, stop using the appliance immediately if it is
►
damaged.
Do not wrap the power cable around the appliance, and
►
protect it from being damaged.
Do not use extension cables – they will make it difficult to
►
disconnect the appliance quickly in an emergency.
Never touch the appliance, the power cable or the power
►
plug with wet hands.
Never submerge the appliance in liquids or never allow
►
liquids to penetrate the appliance housing. Do not expose
the appliance to humidity and do not use it outdoors. If any
liquid gets into the housing, disconnect the appliance from
the mains power socket immediately and have it repaired
by a qualified technician.
│ GB │ IE
■ 4 SHC 240 B2