Operation; Settings - SilverCrest SHC 240 B2 Mode D'emploi

Operation

NOTE
► You may notice a slight smell when using the appliance for the first time.
This is normal and the smell dissipates after a short time.

Settings

NOTE
All buttons except the Release button 8 and the Start button u sound a
►
beep when pressed.
1) Insert the plug into a mains power socket. You will hear a beep, and OFF
appears on the display.
2) Press the On/Off button
display 7 flashes. The set temperature flashes several times before the current
temperature is displayed. The appliance now heats up and the current tempera-
ture rises. As soon as the set temperature is reached, you will hear 2 beeps
and Temperature 7 will light up permanently.
NOTE
► The set temperature may be briefly exceeded occasionally and then drop
again. This happens because the appliance is trying to maintain the set
temperature and reheats repeatedly.
3) Press the Temperature button
the display. The temperature depends on your hair type:
Temperature
NOTE
► If you are not sure what temperature is ideal for your hair, increase the
temperature gradually. Start with a low temperature and increase the
temperature until you are happy with the result.
│ GB │ IE
■ 8
r. You will hear a beep and the temperature
130°C
150°C
170°C
190°C
210°C
230°C
0 until the desired temperature appears on
Hair type
very fine, stressed and damaged hair
fine hair
normal hair
wavy hair
thick or wavy hair
thick, curly hair
SHC 240 B2