Installation - AEG RMB76121NX Mode D'emploi

6 www.aeg.com

3. INSTALLATION

WARNING!
Refer to Safety chapters.
Location
• This appliance is not intended to be
used as a built-in appliance.
• In case of different installation from
freestanding respecting space
required in use dimensions, the
appliance will function correctly but
energy consumption might increase
slightly.
• To ensure appliance's best
functionality, you should not install
the appliance in the nearby of the
heat source (oven, stoves, radiators,
cookers or hobs) or in a place with
direct sunlight. Make sure that air can
circulate freely around the back of the
cabinet.
• This appliance should be installed in
a dry, well ventilated indoor position.
• To ensure best performance, if the
appliance is positioned below an
overhanging wall unit, the minimum
distance between the top of the
cabinet shall be maintained. Ideally,
however, the appliance should not be
positioned below overhanging wall
units. One or more adjustable feet at
the base of the cabinet ensure that
the appliance stands level.
WARNING!
If you position the appliance
against the wall, use back
spacers provided or keep the
minimum distance indicated in the
installation instructions.
WARNING!
If you install the appliance next
to a wall, refer to the installation
instructions to understand the
minimum distance between the
wall and the side of the appliance
where door hinges are to provide
enough space to open the door
when the internal equipment is
removed (e.g. when cleaning).
• This appliance is intended to be used
at ambient temperature ranging from
10°C to 43°C.
Note: The correct operation of the
appliance can only be guaranteed
within the specified temperature
range.
• If you have any doubts regarding
where to install the appliance, please
turn to the vendor, to our customer
service or to the nearest Authorised
Service Centre.
• It must be possible to disconnect
the appliance from the mains power
supply. The plug must therefore be
easily accessible after installation.