Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
K 5
Service
Service
A thermal cutout is installed in the appliance to prevent it overheating. If the appliance generally does not
heat the water, this thermal cutout may have been tripped.
Unplug the power cable and fill the appliance. Wait for approx. 3 minutes, then plug the cable into the
socket outlet.
If the thermal cutout is subsequently tripped again, a malfunction may have occurred and must be repaired
by a qualified specialist.
Important:
In all other cases, unplug the power cable and call a qualified specialist to repair the malfunc-
tion.
Mains power cable
If the mains power cable for the appliance is damaged, it must be replaced by a special cable. This cable
can be ordered from the manufacturer.
PE
PE
Netzklemme
Mains terminal
Heizung
Heating
d
KPR
d
KPR
Temperatursicherung
Thermal cutout
Temperaturwählbegrenzer
Temperature limiter
TWB
TWB
Heizung 2000 W
Heating 2000 W
Boiling point controller
Kochpunktregler
d
KPR
(KPR)
24
Kontroll-
Indicator
lampe
Publicité
Table des Matières
