Preparations; Montage - clage K 5 Mode D'emploi

Masquer les pouces Voir aussi pour K 5:

Table des Matières

Les langues disponibles

K 5

Preparations

–

A water connection 23 mm long with G ½" internal thread and a thread length of at least 15 mm must

be available for installation (see Fig. 1).

–

A correctly installed and earthed socket outlet must also be available.

–

Mark and drill holes accordingly (see Fig. 2) and insert 6 mm dowels.

–

Use a spirit level to ensure they are centred and horizontal!

Montagewand

Mounting wall

G ½"

G1/2"

1. Remove cover (1). For this purpose, unhook the two de-

tents (2), i.e. press them gently away from the appliance

with a small screwdriver or your hand and lift off the

cover.

2. With two fork wrenches size 30 and size 27 unscrew the

connection between the union nut ¾" (4) and the water

connection (5).

3. Using a size 27 fork wrench, screw in the water connec-

tion (5) with hemp or PTFE tape. Check the distance of

40 mm (Fig. 4).

Fig. 1

150

Water connection ½"

Wasseranschluss 1/2"

256

Fig. 2

Montagewand

Mounting wall

Fig. 3

Table des Matières