Technical Data; Information About Material And Characteristics; Nameplate And Serial Number; Noise Development - ORTHOSCOOT NH1 Mode D'emploi

Masquer les pouces Voir aussi pour NH1:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Technical data

Weight:
Length:
Wheelbase:
Width:
Ground clearance:
Height of handlebar
above ground:
Pack size
Length: 840 mm / Width: 480 mm / Height: 530 mm / Girth size: 2860 mm

Information about material and characteristics

Frame:
Aluminum 7005
Outer shell:
Nylon PA66 + 30% glass fiber, high-grade tough and non-splintering, of low flammability
Inner pocket: 100% polyester, with reinforcement grids, very tear-resistant
Tires:
PU foam, fail-safe & color-neutral, do not leave any residue on floorings,
of low flammability
Rims:
Nylon PA6 + 25% glass fiber, tough and non-splintering, of low flammability
Knee rest:
PU foam, of low flammability according to DIN EN 1021 -1 and -2

Nameplate and serial number

The nameplate of the ORTHOSCOOT
nently fixed to the left-hand side (in the driving directi-
on) of the frame. It contains data from the manufactu-
rer and a reference to the serial number.
Under no circumstances may this identification infor-
mation be covered or manipulated.
Change of term 4/2017: Orthopedic scooter

Noise development

The ORTHOSCOOT
NH1 produces a very low level of noise. On firm, level ground it produces an average conti-
®
nuous sound pressure level of 20 to 30 decibels. This is the equivalent of a low whisper.

Service and operating life

The ORTHOSCOOT NH1 must be serviced and checked for suitability for use by a certified ORTHOSCOOT part-
ner after each patient use, but after one year at the latest, in accordance with the applicable quality management
guidelines. This partner confirms the suitability for use for one application interval each, but for a maximum of one
year of use.
Manufacturer
ORTHOSCOOT
GmbH
®
Gessertshausener Straße 2
86356 Neusäß/Vogelsang
Germany
50
You are the first person to read this.
13,6 kg
920 mm
655 mm
580 mm
35 mm
min. 870 mm / max. 960 mm
NH1 is perma-
®
Tel:
+49 (0)821 71 01 99 20
Fax:
+49 (0)821 71 01 99 40
e-mail: info@orthoscoot.com
web:
www.orthoscoot.com
Saddle height
above ground:
min. 410 mm/max. 515 mm
Supporting surface
knee pad:
300 mm x 100 mm
Tire dimension:
10" x 25 mm
Turning circle:
2950 mm
Additional load
of transport bag:
max.
User weight:
max. 120 kg (incl. cockpit load)
The serial number is permanently stamped onto the
right-hand side (in the driving direction) of the under-
side of the frame.
Under no circumstances may this identification infor-
mation be covered or manipulated.
4 kg
ORTHOSCOOT
NH1
®

Publicité

Chapitres

Table des Matières
loading

Table des Matières