Additional Performance Of The Orthoscoot ® Nh1; Tow Hook; Storage Space - ORTHOSCOOT NH1 Mode D'emploi

Place bare into the left transportation wedge
Place bare into the left wedge
Place heels into the right wedge
Place wheels into the right transportation wedge
Additional performance of the ORTHOSCOOT

Tow hook

In order to protect against theft, the ORTHOSCOOT
NH1 was furnished with an eyelet which serves for
the fastening of a lock.
Please ensure that the ORTHOSCOOT
locked to fixed, immovable objects when not in use.
Our special ORTHOSCOOT
requirements.
46
is always
®
lock fits best to the
®
You can now place the handlebar unit inside the left
cardboard transport block as illustrated. Please en-
sure that there are no kinks in the red brake cable and
that it is not folded.
Make sure to fully fold back the handlebar shaft into
the interior of the transport bag as illustrated. Please
use the small cardboard packaging for packing the
two front wheels and push the packaging into the
right transport block as illustrated.
Close the packaging by first folding the two smaller
side flaps inwards. Then fold the two large longitu-
dinal flaps inwards in the order which enables the
safety flap to be inserted.
Now your ORTHOSCOOT
and protected against possible damage during trans-
port.
NH1
®

Storage space

The ORTHOSCOOT
®
objects with you.
Please note that these objects are not protected
against environmental influences, such as: splashing
water.
Furthermore, our load and safety regulations must
absolutely be observed (see page 31).
NH1 is securely packed
®
NH1 allows you to carry smaller
®
ORTHOSCOOT NH1
®