Shimano Steps E6000 Série Mode D'emploi page 78

Removing the battery
The following description may not be applicable as different types of keys are available.
< BT-E6000/BT-E6001/BT-E6010/BT-E8010 >
1.
Turn off the power, then insert the key into the key
cylinder in the battery holder.
• The position of the key does not affect the insertion of the
battery. You can insert it regardless of the key position.
• You cannot remove the key when it is not in the inserting
position.
2.
To unlock the battery turn the key to the left until
you feel some resistance.
< BT-E6000/BT-E6001 >
Key cylinder
Key
< BT-E6010/BT-E8010 >
Key
Key cylinder
< BT-E6000/BT-E6001 >
<BT-E6010/BT-E8010>
19