Important Notice; Important Safety Information; To Ensure Safety; Handling The Battery - Shimano Steps E6000 Série Mode D'emploi

User's manuals in other languages are
available at :
http://si.shimano.com

IMPORTANT NOTICE

• Contact the place of purchase or a bicycle dealer for
information on installation and adjustment of the
products which are not found in the user's manual. A
dealer's manual for professional and experienced bicycle
mechanics is available on our website (http://si.shimano.
com).
• Do not disassemble or alter this product.
• Use the product according to local laws and regulations.
For safety, be sure to read this user's
manual thoroughly before use, and
follow them for correct use.

Important safety information

For replacement information, contact the place of purchase
or a bicycle dealer.
Be sure to observe the following in order to avoid burns or
other injury from fluid leakages, overheating, fire or
explosions.

To ensure safety

DANGER

Handling the battery

• Do not deform, modify, disassemble or apply solder
directly to the battery. Doing so may cause leakage,
overheating, bursting, or ignition of the battery.
• Do not leave the battery near sources of heat such as
heaters. Do not heat the battery or throw it into a fire.
Doing so may cause bursting or ignition of the battery.
• Do not subject the battery to strong shocks or throw it. If
this is not observed, overheating, bursting, or fire may
occur.
• Do not place the battery into fresh water or sea water,
and do not allow the battery terminals to get wet. Doing
so may cause overheating, bursting, or ignition of the
battery.
• Use the Shimano specified charger and observe the
specified charging conditions when charging the
specified battery. Not doing so may cause overheating,
bursting, or ignition of the battery.
2