1- Reading The Current Receiver Radio Channel - Jay Electronique Orion OREL Notice D'installation Et D'utilisation

7.8.1- Reading the current receiver radio channel

 The reading of the receiver radio channel number is done from the
receiver by
ORRA
V3
ORRS ORRD
See list of available radio frequencies (radio channels) in
ORRS and ORRA receivers : Switch off the receiver
1
ORRD receiver : the receiver can remain powered up throughout the procedure
ORRS and ORRA receivers : install the jumpers
the settings.
ORRD receiver : set the microswitches
ORRS
2
V1 V2 V3
JP1 JP2
R2
ORRS and ORRA receivers : Switch on the receiver
3
ORRD receiver : go to the next step
V2
number.
V2
4
V3
Example :
V2
number is «06» (433.600MHz).
ORRS and ORRA receivers : switch off the receiver and remove the
5
ORRD receiver : set the
FR
- 96 -
and
LEDs.
JP3
R3
R4
ORRA
and V3
ORRS ORRD
(red) indicates the tens, «ON» = 10, «OFF» = 0
ORRA
ORRS ORRD
(green) indicates the units by fl ashing.
«OFF», and V3
.jumpers.
EN DE
jumper/microswitch and V2
ORRA
JP1 JP2
V1 V2 V3
LEDs indicate the current receiver radio channel
ORRA
ORRS ORRD
fl ashing 6 times, the current radio channel
and microswitches to the «OFF» position
and
and to the «ON» position
ORRD
JP1
JP2
JP3
Orion - 324501G
and
appendix H
to confi gure
OFF ON
JP3
JP4
V1 V3 V2
and