Product Confi Guration; Confi Guration Steps To Be Respected - Jay Electronique Orion OREL Notice D'installation Et D'utilisation

7 - Product confi guration
7.1- Confi guration steps to be respected
Before fi nal installation and use, we recommend that you confi gure the units
with customized settings as detailed in steps 1 to 7. These steps must be
performed on an insulated work surface in the workshop.
Step 1
Step 2
Step 3
(Optional)
Step 4
(Optional)
Step 5
(Optional)
Step 6
(Optional)
Step 7
Orion - 324501G
Programmation du nouveau code d'identité de l'émetteur
> see chapter
standard confi guration
Standard association of
transmitter buttons with receiver
relays :
button nb.1 > relay nb.1,
button nb.2 > relay nb.2
etc...
(Previous settings are
automatically erased)
> see chapter «Standard»
Transmitter / Receiver
association
Operating mode programming procedure for function relays
> see chapter
Interlocking of confl icting commands programming procedure
> see chapter Programming of confl icting command interlocking
Radio channel programming procedure
> see chapter Programming of confl icting command interlocking
«Standby» function time programming procedure
> see chapter «Standby» function time programming (Automatic
Proceed to the installation on site by respecting the installation
recommendations described in chapter
Transmitter identity code programming
or
parameter erasing procedure
transmitter buttons with receiver
Programming of relay operating modes
shutdown of transmitter)
recommendations
DE
Customized confi guration
Receiver pre-settings erased
> see chapter Receiver
Customized association of
relays
> see chapter «Customized»
Transmitter / Receiver
association
Installation and use
EN FR
~ 10 mn
- 77 -