Product Identification At Delivery; Orion Transmitters Delivery Configuration - Jay Electronique ORION Série Notice Technique D'installation Et D'utilisation

3- Product identification at delivery

3.1- Delivery configuration
The ORION transmitters and receivers are supplied with certain parameters pre-set
in factory to allow immediate use of the equipment.
However, it is indispensable to customise these settings to ensure the
uniqueness of your installation and to familiarise yourself with the complete
range of functions provided by the ORION series (see chapter 5).

ORION transmitters delivery configuration :

Identity code
Radio channel (1)
"Dead man" function (2)
ORION receivers delivery configuration :
Transmitter buttons /
receiver relays association
(All the default
assignments have been
defined using the identity
code: "ON - ON - ON - ON -
ON - ON - ON - ON")
Radio channel (1)
Relay operating mode
Interlocking of conflicting
commands
(1) = The programming of another radio channel number can only be done with a
transmitter equipped with an "On/Off» button.
(2) = Automatic shutdown of remote control, only available with a transmitter
equipped with an "On/Off» button.
Fr
- 54 -
ON
1 2 3 4 5 6 7
Channel nb.17 (434,700 MHz)
4 mn
Receiver on DIN rail ORRD22 ••• (2+1 or 3 relays) :
- Transmitter buttons B1 and B2 assigned to relays R1 and R2
- "On/R3" relay set for "On" relay"
Industrial receiver (Small model) ORRS21••• (2 relays) :
- Transmitter buttons B1 and B2 assigned to relays R1 and R2
Industrial receiver (Small model) ORRS42 ••• (4+1 relays) :
- Transmitter buttons B1 to B4 assigned to relays R1 to R4
Industrial receiver (Large model) ORRA82 ••• (8+1 relays) :
- Transmitter buttons B1 to B8 assigned to relays R1 to R8
Industrial receiver (Large model) ORRAH2 ••• (16+1 relays) :
- Transmitter buttons B1 to B16 assigned to relays R1 to R16
Channel nb.17 (434,700 MHz)
«Continuous make contact» mode
(After having realized a transmitter button / receiver relay
association, when transmitter button is pressed, relay in the
receiver is activated, when button is no longer pressed, the relay is
deactivated)
No interlocking programmed
Gb De
ON - ON - ON - ON - ON - ON - ON - ON
8
324501F
revision02