HEADRUSH Expression Pedal Guide D'utilisation page 5

Setup with the HeadRush Gigboard
When connected to a HeadRush Gigboard,
you can use the HeadRush Expression Pedal
to control the parameter(s) assigned to Bank
A and/or Bank B of a rig. You can switch
between controlling Bank A and Bank B on
the Gigboard by using the toe switch feature
on the HeadRush Expression Pedal. For more
information on assigning parameters from
your rig to the HeadRush Expression Pedal,
please consult the HeadRush Gigboard User
Guide available at headrushfx.com.
To set up the HeadRush Expression Pedal
with the HeadRush Gigboard:
1. Connect the Expression output of the
HeadRush Expression Pedal to the
EXPR input using a standard 1/4" (6.35
mm) TRS cable.
2. Connect the
HeadRush Expression Pedal to the Toe
input using a standard 1/4" (6.35 mm)
TS cable.
3. On the HeadRush Pedalboard, tap the
... icon on the top right of the screen
and then tap Global Settings to enter
the Global Settings menu.
4. On the Global Settings page under the
External Pedal/Ext Amp parameters,
set the Toe Switch parameter to be
MOMNT, and Pedal Polarity parameter
to be NORM.
The HeadRush Expression Pedal will
now be able to control the parameter(s)
assigned to Bank A and/or Bank B of a
rig.
Toe output of the
Artwork Approval
Design Development
5