Connecting External Components - JVC KD-T905BTS Manuel D'instructions

INSTALLATION/CONNECTION

Connecting external components

Connecting external amplifiers via output terminals
KD-T900BTS/
KD-T905BTS/ KD-TD90BTS/ KD-T700BT/
KD-T805BTS KD-SR85BT KD-TD70BT
Output terminals
Output terminals 2-way crossover setting
REAR : Rear output
FRONT : Front output
SW : Subwoofer output
FRONT : Front output
REAR/SW : Rear/subwoofer output
REAR/SW : Rear/subwoofer output
KD-T905BTS: USB cable (DC 5 V
Microphone input jack (page 15)
KD-T905BTS/KD-T900BTS/KD-T805BTS/KD-TD90BTS:
Expansion port (12 V 500 mA): To the optional SiriusXM Vehicle Tuner
(commercially available) (page 12)
Signal cord (not supplied)
3-way crossover setting
Tweeter output
Mid Range output
Woofer output
Mid Range output
Woofer output
Woofer output
1.5 A) (approx. 1 m/3.3 feet)
Remote wire (not supplied)
JVC Amplifier*2
*2 Firmly connect the ground wire of the amplifier to the car's chassis to avoid damaging the
unit.
To remote lead
(blue/white) of
the wiring harness.
(Page 40)
41
ENGLISH