Troubleshooting Table; Disposal Of The Old Device - CASO DESIGN Stick SV 400 Manuel D'utilisation Original

9.3 Troubleshooting table

The digital display is lit, but the device does not start the cooking program and displays
an error code instead:
Error Possible Causes
Code
E1 1. Cooking vessel is empty
2. Water too low
3. Device is not positioned
correctly on the table
4. Error in electronics
E2, E3 Error in electronics
E4 Overheating protection
Please note
► In the event of technical troubles, faulty devices or missing parts, please contact the
Customer Service.

Disposal of the Old Device

10
To protect the environment, it's important to dispose of old electronic devices
properly. Do not place your old unit in the non-recyclable waste under any
circumstances.
Please note
► Please take your old unit to the nearest recycling center for safe disposal.
► Until it can be disposed of properly, store your old unit away from children.
Guarantee
11
12 Months Limited Warranty
Solution
Fill clean water up to above the "MIN" level.
Press to start the device again. If the
device should indicate "E1" in the LED
display after switching on even though the
water filled in is above the minimum level,
please add some salt to the water and stir
well.
Fill clean water up to above the "MIN" level.
Place the device on a flat surface
Please contact customer service
Please contact the Customer Service.
Refill water. Press
again.
to start the device
16