Troubleshooting; Safety Notices; Troubleshooting Table - CASO DESIGN SousVide Garer SV 1200 Smart Mode D'emploi

21 Troubleshooting

The following table may help you narrow down and address minor malfunctions:

21.1 Safety notices

Danger
► Only qualified electricians, who have been trained by the manufacturer may carry out
any repairs on electrical equipment.
► Improperly performed repairs may result in personal injury or damage to the device.
21.2 Troubleshooting
The device does not work:
1. Check that the cable is properly plugged into the wall socket
2. Check cable for damage.
3. Verify that the wall socket works with another device.

21.3 Troubleshooting table

The digital display is lit, but the device does not start the cooking program and displays
an error code instead:
Error Possible Causes
Code
EE1 1. Cooking vessel is empty
2. Water too low
3. Device is not positioned
correctly on the table
4. Error in electronics
► In the event of technical troubles, faulty devices or missing parts, please contact
Customer Service.
PLEASE NOTE
Solution
Fill clean water up to above the "MIN"
level. If the device should indicate "EE1"
in the LED display after switching on even
though the water filled in is above the
minimum level, please add some salt to
the water and stir well.
Fill clean water up to above the "MIN"
level.
Place the device on a flat surface
Please contact customer service
40