Troubleshooting Table; Disposal Of The Old Device; Guarantee - CASO DESIGN 1327 Mode D'emploi Original

21.3 Troubleshooting table

The digital display is lit, but the device does not start the cooking program and displays
an error code instead:
Error Possible Causes
Code
EE1 1. Cooking vessel is empty
2. Water too low
3. Device is not positioned
correctly on the table
4. Error in electronics
► In the event of technical troubles, faulty devices or missing parts, please contact
Customer Service.

22 Disposal of the Old Device

To protect the environment, it's important to dispose of old electronic devices
properly. Do not place your old unit in the non-recyclable waste under any
circumstances.
► Please take your old unit to the nearest recycling center for safe disposal.
► Until it can be disposed of properly, store your old unit away from children.

23 Guarantee

We provide a 24 month guarantee for this product, commencing from the date of sale,
for faults which are attributable to production or material faults.
Your legal guarantee entitlements in accordance with § 439 ff. BGB-E remain
unaffected by this. The guarantee does not include damages, which were incurred as a
result of improper handling or use, as well as malfunctions which only have a minor
effect on the function or the value of the device. Consumables, transit damages,
inasmuch as we are not responsible for these, as well as damages, which were incurred
as a result of any repairs that were not performed by us, are also excluded from the
guarantee entitlements.
PLEASE NOTE
PLEASE NOTE
Solution
Fill clean water up to above the "MIN"
level. If the device should indicate "EE1"
in the LED display after switching on even
though the water filled in is above the
minimum level, please add some salt to
the water and stir well.
Fill clean water up to above the "MIN"
level.
Place the device on a flat surface
Please contact customer service
42