Sousvide Cooking - CASO DESIGN 1327 Mode D'emploi Original

18.1 SousVide cooking

Cook gently in a vacuum bag. The food is cooked at low temperature in its own juice,
making it particularly tender and tasty.
1. Plug in the power plug.The button
and the device is in standby mode.
2. Press button
3. Set desired temperatur with
4. Press button
with and
and . Confirm with
5. You can hear a signal and the operation indicator is flashing when the desired
temperature is reached..
6. The device will beep once desired temperature is reached. Place the vacuumed food
into the cooking vessel. If needed weight the vacuumed bags.
7. The device counts down the time and will beep again, once time is over. Then "End"
is shown in display.
8. When you want to change the settings please press
change settings as described above.
9. You can deactivate the device by pressing
switch to standby mode. Display shows C for °C or F for °F and the
illuminated. If you hold the
and °F.
► Risk of scalding! Carefully remove the food.
► If the device should indicate "EE1" in the LED display after switching on even though
the water filled in is above the minimum level, please add some salt to the water and
stir well.
briefly until the device beeps.
, to set the time. The timer is flashing. Set the desired hour,
confirm with
buttom for 3 seconds, you can switch between °C
Warning
Note: EE1
and operation indicator are illuminated
and (0 – 90° C).
then set desired minute with
and the device starts the heating process
for 3 seconds. The device will
for 3 seconds and
button is
39