Sony HT-S100F Manuel D'instructions page 15

3
Fasten the screws into the marks
on SCREW LINE () of WALL
MOUNT TEMPLATE as the
illustration below.
228.5 mm
(9 in)
Screws
6 mm to
7 mm
(approx.
1/4 in)
4
Remove WALL MOUNT TEMPLATE.
5
Hang the Bar Speaker on the
screws.
Align the holes of the rear of the Bar
Speaker with the screws, then hang
the Bar Speaker on the two screws.
228.5 mm
(9 in)
Marks
Note
When sticking WALL MOUNT TEMPLATE,
smooth it out fully.
15
US