Remove Packaging; Identification Of Parts - Ayce ALUMINIO Mode D'emploi

way and understand the hazards involved. Children shall not play
with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
• This appliance must be placed on a flat and smooth area and the
power cord must not pass close to heating appliances.
• Always connect this appliance to a 220-240V mains power outlet.
• For domestic indoor use only.
• Never dip the appliance into water or any other liquid.
• Unplug or disconnect the appliance from the mains power supply
when not in use or before cleaning it.
• Store the appliance in a clean, dry location if you do not plan to use
it for a long period.
• Never use a damaged cord or plug. If the supply cord is damaged,
it must be replaced by the manufacturer, its service agent or
similarly qualified persons in order to avoid a hazard.
• Only qualified service representatives should perform repairing
and maintenance services.

Remove Packaging:

• Please carefully unpack the components and check that no
damage occurred during transportation. If any damage is
apparent or any component is missing, please contact the dealer
immediately.
• Save the packaging to store the Fan while it is not being used.
Keep the original box! It can be used for storage in winter season.

IDENTIFICATION OF PARTS

Handle
Oscillation part
Wind outlet
Control panel
power cord socket
Base
INSTALLATION
Installation accessories:
1 Base
3 Remote Control
Remoter control
Wind inlet
OFF
ON
Recharge switch
2 Screw
4 Power Cord
46 47 G