SilverCrest SKMH 1100 A1 Mode D'emploi page 91

RP93471 Küchenmaschine mit Heizung LB2 Seite 89 Donnerstag, 14. August 2014 3:30 15
– If the blender jug 6 is not positioned
correctly, a safety mechanism will
prevent the appliance from operating.
7.4 Inserting and removing the mixer
attachment
The mixer attachment 22 is placed on the
blade assembly 20 :
• It must be possible to completely
position the mixer attachment 22
without encountering any resistance. If
this proves not to be the case, rotate the
mixer attachment 22 through 90° and
position it afresh;
• The fins of the mixer attachment 22 are
accommodated in the spaces between
the blades;
Caution!
– The mixer attachment 22 may be
used only at speeds 1 to 4.
– The pulse button 9 may not be used
together with the mixer attachment 22.
– When the mixer attachment 22 is
used you may not use the spatula 23
because it could get into the mixer 22;
– When you add foodstuffs, make sure
they do not prevent the mixer
attachment 22 from rotating.
– the mixer attachment 22 is not
suitable for kneading firm dough for
foods such as pizza or bread. The
blade assembly 20 works better for
this.
To remove the mixer attachment 22, pull it
off upwards.
7.5 Positioning the lid of the blender jug
The lid of the blender jug 25 can be fitted
only if the jug 6 is correctly positioned.
1. Check that the sealing ring 24 is
properly seated in the lid of the jug 25.
SKMH 1100 A1
2. Place the lid 25 on the jug 6 at a slight
angle.
The symbol of the open lock points to the
arrow on the lock 16.
3. Rotate the lid of the jug 25 in such a
way that the closed lock symbol points
to the arrow on the lock 16.
Notes:
• The appliance can be started only if the
lid of the blender jug 25 is correctly
positioned.
• To ensure the lid for the jug 25 is
correctly latched into place you will find
it useful to press slightly on the lock
symbol while screwing it shut.
• If the lid of the jug 25 is
not correctly positioned
an appropriate symbol
will appear on the
display.
7.6 Using the lid for the blender jug's fill
opening with measuring scale
The cover for the fill opening of the blender
jug with measuring scale 26 serves both to
close the jug 6 and to measure the
ingredients.
89