Adjusting The Image - Epson ELPLX03 Mode D'emploi

After Replacing the Lens Unit
中
文
After replacing the lens unit, calibrate the lens so that the projector can correctly acquire the
lens position and adjustment range. After attaching a lens unit, a message is displayed when the
简
projector is turned on. Select [Yes] to calibrate the lens.
体
中

Adjusting the Image

文
For more information on the following, see the User's Guide supplied with the projector.
繁
• Focus adjustment
体
• Distortion adjustment
When you perform distortion adjustment, the size of the screen changes.
日
• Lens shift
本
• Keystone correction
語
*This product is a fixed focus lens. The zoom function is not supported.
The User's Guide is available from the following Web site.
epson.sn
8
Tighten the two screws to fix the decorative
H
cover.
Turn the screws by hand.
You can remove the handles from the lens unit with a
commercially available hexagonal wrench (5 mm).
Keep the handles in a safe space.
Remove the lens cover (large).
I
Keep the lens cover in a safe place.