Adjusting The Length Of The Pole - Epson ELPMB26 Guide De L'utilisateur

Procedure
Refer to the ceiling template to cut the bolt-mounting holes into the ceiling.
Turn the side of this
cutout to the screen.
Holes for horizontal rotation adjustment
The direction of the projector can be
adjusted at up to ±5 degrees by rotating it.

Adjusting the Length of the Pole

Procedure
24
Ceiling template (units: mm)
The center of rotation
when adjusting
horizontally
270
40
80
507.4 - 607.4
A
Remove the two fixing bolts using the
supplied M8 wrench.
B
Remove the four assist-screws on both
sides using the supplied M6 wrench.
160
80
14