Electrolux ERF3869SOW Notice D'utilisation page 40

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

40
www.electrolux.com
8.7 Starting the water system
for the first time
Ensure proper connection to the water
supply, refer to "Connecting the water
hose".
1. Open the tap on the water
connection.
2. Start the refrigerator.
The water system main valve opens and
the pump starts to fill the system.
Water from final inspection
testing may be resident in
the appliance. Dispense and
discard at least 2 litres of
plain water and 1 litre of
carbonated water prior to
use.
8.8 Levelling
When placing the appliance ensure that
it stands level. If necessary adjust the
feet using the adjustment spanner
supplied. Door alignment is dependent
on proper levelling.
8.9 Installation of the Taste
Guard filter
CAUTION!
The filter should be handled
carefully so fragments do not
loosen from the surface.
Make sure that the air lever
flap is closed to obtain
proper function.
The Taste Guard filter is an active carbon
filter which absorbs bad odors maintain
the best flavour and aroma for all
foodstuffs without risk of odor cross
contamination.
On delivery the carbon filter is in a plastic
bag to preserve performance.
1. Open the air lever flap.
2. Take the filter out of the plastic bag.
3. Insert the filter in the slot found in the
back of the air lever flap.
4. Close the air lever flap.
8.10 Installation of the water
filter.
1. Unpack the filter.
2. Remove the accessories in front of
the water module and open the
service hatch.
3. Place a cloth or a piece of kitchen
towel in the space beneath the water
filter.
4. Pull the bypass cartridge outwards,
grasping the lower part, until the
water bypass cartridge is
automatically ejected.
5. Remove the protective wrapping of
the new water filter and insert the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Erf3869sox

Table des Matières