Every 6 Months; Cremoving The Distributor Head - Cassese MACH 1CART Manuel D'utilisation

USER MANUAL
5.B.c

Every 6 months:

Every 6 months a maintenance should be performed to ensure proper function of the machine, perform the following procedure
to do it:
5.A SAFETY INSTRUCTIONS (page 21)
5.C REMOVING THE DISTRIBUTOR HEAD (page 22)
5.D LUBRICATING THE DISTRIBUTOR HEAD (page 23)
5.F RESETTING THE MAINTENANCE ALARM (page 24)
5.G REMOVING THE SIDE PANEL (page 24)
5.H LUBRICATING THE HORIZONTAL COLUMNS (page 25)
5.I TESTING THE SAFETIES OF THE MACHINE (page 25)
5.C REMOVING THE DISTRIBUTOR HEAD
Periodically, remove the distributor head to clean and lubricate it. First, remove the strip of wedges. To do so, follow this
procedure :
Allen key N. 2,5
Rotate the loading
button in the LOAD
position.
The wedge pusher
will move back to
allow you removing
the cartridge.
With the 2.5mm
Allen Key, unscrew
the locking screw
half a turn.
Remove
cartridge.
Then, for your safety,
perform procedure
I.5.A
INSTRUCTIONS
21)
Figure 5-3
Pull out
distributor head of
the machine.
Figure 5-5
the
SAFETY
(page
the
MACH 1 CART
Figure 5-4
Figure 5-6
22