Auto Mode - Cassese MACH 1CART Manuel D'utilisation

USER MANUAL MACH 1 CART
Once the parameters are set you can then configure the execution. Select the
mode you would like to use for stapling. Press AUTO/ MANU the green LED will
show what mode is engaged.
MANUAL MODE : this mode will require two actions to get the corner done.
Pressing the pedal will engage the front clamps to keep both mouldings
together. You can then check the joining before launching the stapling with the
stapling button. Manual mode will be selected by default at each power up of
the machine.
AUTO MODE: this is the quickest mode, the machine will engage the front
clamps and staple immediately when the pedal is pressed.
Figure 4-7
As a safety, releasing the pedal will stop the machine immediately.
20