Setup Menu; Input/Output Assign - Onkyo TX-L50 Manuel D'installation

> Before Start > Part Names

Setup Menu

Advanced Setup
1
TV's remote controller
54
> Install > Initial Setup
2
> Playback
Supplementary Information |
The unit allows you to configure advanced settings to provide you with an even better
experience.
1. Switch the input on the TV to that assigned to the unit.
2. Press on the remote controller.
3. After the Setup menu is displayed, select the content with
and press ENTER to confirm your selection.
Setup

1. Input/Output Assign

2. Speaker
3. Audio Adjust
4. Source
5. Hardware
6. Miscellaneous
0 Change the initial values for each of the settings with the cursors
0 To return to the previous screen, press
4. To exit the settings, press .
1. Input/Output Assign
■ 1. TV Out / OSD
1080p -> 4K Upscaling When using a TV that supports 4K, video signals input at 1080p
can be automatically upscaled to 4K for output.
"Off (Default Value)": When not using this function
"Auto": Use this function
0 Select "Off" if your TV does not support 4K.
Super Resolution When you have set "1080p -> 4K Upscaling" to "Auto", you can
select the degree of video signal correction from "Off" and
between "1" (weak) and "3" (strong).
OSD Language Select the on-screen display language.
English, German, French, Spanish, Italian, Dutch, Swedish,
Russian, Chinese
Advanced Setup
/ on the remote controller
1. TV Out / OSD
2. HDMI Input
3. Digital Audio Input
4. Analog Audio Input
/ .
.
| Others
E
N