Télécharger Imprimer la page

Advanced Operations; Advanced Setup; On-Screen Setup Menus; Common Procedures In Setup Menu - Onkyo HT-R980 Manuel D'instructions

Masquer les pouces Voir aussi pour HT-R980:

Publicité

Les langues disponibles

Les langues disponibles

Advanced Operations

Advanced Setup

On-screen Setup Menus

The on-screen setup menus appear only on a TV that
is connected to the HDMI OUT. If your TV is con-
nected to the composite video MONITOR OUT or the
COMPONENT VIDEO OUT, use the AV receiver's
display when changing settings.
This manual describes the procedure using the
remote controller unless otherwise specified.
MENU
a
1. Input/Output Assign
b
2. Speaker Setup
3. Audio Adjust
c
d
4. Source Setup
5. Listening Mode Preset
e
f
6. Miscellaneous
7. Hardware Setup
g
h
8. Remote Controller Setup
9. Lock Setup
i
a Input/Output Assign
37)
(➔
1. Input/Output Assign
1. Monitor Out
2. HDMI Input
3. Component Video Input
4. Digital Audio Input
b Speaker Setup
(➔
39)
2. Speaker Setup
1. Speaker Settings
2. Speaker Configuration
3. Speaker Distance
4. Level Calibration
5. Equalizer Settings
6. THX Audio Setup
c Audio Adjust
(➔
42)
3. Audio Adjust
1. Multiplex/Mono
2. Dolby
3. DTS
4. Theater-Dimensional
5. LFE Level
d Source Setup
(➔
4. Source Setup
1. Audyssey
2. IntelliVolume
3. A/V Sync
4. Name Edit
5. Picture Adjust
e Listening Mode Preset
(➔
47)
5. Listening Mode Preset
1. BD/DVD
2. VCR/DVR
3. CBL/SAT
4. GAME
5. AUX
6. TUNER
En
7. TV/CD
8. PORT
36
f Miscellaneous
48)
(➔
6. Miscellaneous
1. Volume Setup
2. OSD Setup
g Hardware Setup
(➔
49)
7. Hardware Setup
1. Remote ID
2. Tuner
3. HDMI
h Remote Controller
Setup
(➔
60)
8. Remote Controller Setup
1. Remote Mode Setup
43)
i Lock Setup
(➔
9. Lock Setup
Setup

Common Procedures in Setup Menu

ENTER
q/w/e/r
SETUP
The on-screen setup menus appear on the connected TV
and provide a convenient way to change the AV receiver's
various settings. Settings are organized into nine catego-
ries on the main menu.
Carry out the settings by using the on-screen display.
1
Press RECEIVER followed by SETUP.
The following menu appears.
Tip
• If the main menu doesn't appear, make sure the appropri-
ate external input is selected on your TV.
2
Use q/w to select a menu, and then press ENTER.
3
Use q/w to select target and then press ENTER.
4
Use q/w to select option and e/r to change the
setting.
Press SETUP to close the menu.
Press RETURN to return to the main menu.
Note
50)
• This procedure can also be performed on the AV receiver by
using SETUP, arrow buttons, and ENTER.
• During Audyssey 2EQ
messages, etc., that are displayed on the TV screen will appear
in the Display.
Remote indicator
RECEIVER
RETURN
MENU
1. Input/Output Assign
2. Speaker Setup
3. Audio Adjust
4. Source Setup
5. Listening Mode Preset
6. Miscellaneous
7. Hardware Setup
8. Remote Controller Setup
9. Lock Setup
®
Room Correction and Speaker Setup,

Publicité

Chapitres

Dépannage

loading