Channel Lock - Kenwood DPX791BH Mode D'emploi

SiriusXM® Radio
SiriusXM settings
1 Press FNC to enter [FUNCTION].
2 Turn the volume knob to select [SIRIUS XM], then press the knob.
3 Turn the volume knob to make a selection (see the following table), then press
the knob.
4 Repeat step 3 until the desired item is selected/activated or follow the
instructions stated on the selected item.
5
Press and hold to exit.
To return to the previous setting item, press

CHANNEL LOCK

To unlock settings:
1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter the current pass code.
(Initial pass code is 0000.)
4 Press the volume knob to confirm.
CODE SET 1 Turn the volume knob to select a number.
2 Press S / T to move to the entry position.
3 Repeat steps 1 and 2 to enter a new 4-digit pass code.
4 Press the volume knob to confirm.
5 Repeat steps 1 to 4 to reconfirm the pass code.
• Make a note of the new pass code to enter channel lock settings from next time.
LOCK SETTING MATURE CH: Selects the SiriusXM-defined lock setting. ; USER DEFINED: Selects
the user-defined lock setting. ; OFF: Cancels.
CHANNEL EDIT *
1 1 Turn the volume knob to select a category, then press the knob.
2 Turn the volume knob to select a channel you want to lock, then press the knob.
"L" appears in front of the channel number.
3 Press and hold
CHANNEL CLEAR * 1
YES: Clears all the locked channels. ; NO: Cancels.
14
.
to exit.
TUNE START * 2
ON: Selected SmartFavorite channel starts playback
from the beginning of the song. ; OFF: Cancels.
SIGNAL LEVEL NO SIGNAL/ WEAK/ GOOD/ STRONG: Shows the
strength of the current received signal.
BUFFER USAGE 0% — 100% (0): Shows the memory usage for
Replay buffer.
SXM RESET YES: Resets stored channel and lock setting to
default. ; NO: Cancels.
* 1
Displayed only when [USER DEFINED] is selected.
* 2
Available only if the connected SiriusXM Vehical Tuner is SXV200 or later
that supports SmartFavorites.