Removing The Refrigerator Accessories - Samsung RF23HSESBSR Guide D'utilisation

Examples of food items you can store in the Flex
Zone by temperature setting.
Wine Party
Deli Snacks Cold Drinks Meat Fish
Dishes
• wine • pineapples • bottled
• cocktails • lemons • juice
• cakes • biscuits • soft drinks • bacon
• cheeses • potatoes • beer
Fruit and vegetables may be damaged if
stored under the "Meat Fish" setting.
Do not store lettuce or other leafy produce
in the Flex Zone.
CAUTION
Do not store glass bottles in the Flex Zone under
the "Cold Drinks" or "Meat/Fish" setting.
If they are frozen, they can break and cause
personal injury.
RECOMMENDED LOCATION
FOR THE FOLDABLE SHELF
The Foldable Shelf folds up from the center, giving
you more storage area for tall items without your
having to re-arrange the shelves.
• Install the Foldable Shelf on the right side of
the refrigerator.
• If you install the Foldable Shelf on the left side,
the ice maker will prevent the shelf from folding
completely.
• To use, push the front portion of the shelf
back gently so that the shelf folds up from the
middle.
Recommended Location
REMOVING THE
REFRIGERATOR
ACCESSORIES
• steaks 1. Door Bins
water
• Door Bins ( 1 )
• cold cuts
- To remove : Simply lift the bin up and pull
• chili dogs
- To relocate : Slide it in above the desired
• Door Bins ( 2 )
- To remove : Take the right side of the bin out
- To relocate : Slide it into the original location
• Sparkling Water model door bins ( 2 )
- To remove : Take the right side of the bin out
- To relocate : Align the positions of the Door
- When removing and re-assembling the Bottom
Touch
English - 40
straight out.
location and push down until it stops.
by lifting it at an angle along the guide, and
then take the left side out by pulling it from the
door.
and push down until it sticks.
by lifting it at an angle along the guide, and
then take the left side out by pulling it from the
door.
Bin's holes carefully, and then slide the bin in
above the desired location and push down
until it stops.
Door Bin of the Sparkling Water model, open
the Cylinder Cover and tilt the Cylinder towards
the front first.