Changing The Water Filter - Samsung RF23HSESBSR Guide D'utilisation

CHANGING THE WATER
FILTER
WARNING
To reduce the risk water damage to your property
DO NOT use generic brands of water filters in your
SAMSUNG Refrigerator.
USE ONLY SAMSUNG BRAND
WATER FILTERS.
SAMSUNG is not legally responsible
for any damage, including, but not
limited to, property damage caused
by water leakage from the use of a
generic water filter.
SAMSUNG Refrigerators are designed to work
ONLY WITH SAMSUNG Water Filters.
The Filter light turns red to let you know when it is
time to change your water filter cartridge.
To give you time to get a new filter, the red light
comes on just before the capacity of the current
filter runs out.
Changing the filter on time provides you with the
freshest, cleanest water from your refrigerator.
To Change the Water Filter
1. Shut off the water supply.
Then, turn the water filter ( 1 ) about 1/4 turn,
counter-clockwise.
2. Pull the water filter ( 1 ) from the case filter ( 2 ).
• To change the water filter more easily,
shut off the water supply valve.
• Sometimes, it is hard to disassemble the water
filter because impurities in the water cause it
to stick.
If you are having difficulties, grip the water filter
firmly and pull it hard.
• When you pull the water filter, a little water can
leak from the opening.
This is normal.
To minimize the water leaks, keep the filter
cartridge horizontal when you pull it.
(Red) • To prevent overflow, empty the water filter tray
( 3 ) and dry around the filter case ( 2 ).
3. Insert the new filter into the filter case ( 4 ).
4. Push the filter, and then turn it clockwise until
it locks.
(2)
• If you have trouble inserting the water
filter because of high water pressure,
(1)
shut off the water supply valve.
• The locked symbol should be lined up with the
indicator line.
English - 27
(2)
(3)
(4)