Troubleshooting - JVC KD-X342BT Manuel D'instructions

TROUBLESHOOTING

Symptom Remedy
Sound cannot be heard. • Adjust the volume to the optimum level.
• Check the cords and connections.
"MISWIRING CHECK Turn the power off, then check to be sure the terminals
WIRING THEN PWR ON" of the speaker wires are insulated properly. Turn the
appears. power on again.
"PROTECTING SEND Send the unit to the nearest service center.
SERVICE" appears.
Source cannot be selected. Check the [SOURCE SELECT] setting. ( 4)
• Radio reception is poor. Connect the antenna firmly.
• Static noise while
listening to the radio.
Playback order is not as The playback order is determined by the file name
intended.
Elapsed playing time is not This depends on the recording process earlier.
correct.
"NOT SUPPORT" appears Check whether the file is a playable format. ( 22)
and file skips.
"READING" keeps flashing. • Do not use too many hierarchical levels and folders.
• Reattach the USB device.
"UNSUPPORTED DEVICE" • Check whether the connected device is compatible with
appears. this unit and ensure the file systems are in supported
formats. ( 22, 23)
• Reattach the device.
"UNRESPONSIVE DEVICE" Make sure the device is not malfunction and reattach
appears. the device.
"USB HUB IS NOT This unit cannot support a USB device connected via a
SUPPORTED" appears. USB hub.
"CANNOT PLAY" appears. Connect a USB device that contains playable audio files.
24
ENGLISH
Symptom Remedy
The iPod/iPhone does not • Check the connection between this unit and iPod/
turn on or does not work iPhone.
• Detach and reset the iPod/iPhone using hard reset.
"LOADING" appears when This unit is still preparing the iPod/iPhone music list. It
you enter search mode by may take some time to load, try again later.
pressing .
Correct characters are not • This unit can only display uppercase letters, numbers,
displayed. and a limited number of symbols.
• Depending on the display language you have selected
( 5), some characters may not be displayed correctly.
• Sound cannot be heard • Reconnect the Android device.
during playback. • If in [AUDIO MODE], launch any media player
• Sound output only from application on the Android device and start playback.
the Android device. • If in [AUDIO MODE], relaunch the current media player
application or use another media player application.
• Restart the Android device.
• If this does not solve the problem, the connected Android
device is unable to route the audio signal to unit. ( 23)
Cannot playback at • Make sure JVC MUSIC PLAY APP is installed on the
[AUTO MODE]. Android device. ( 7)
• Reconnect the Android device and select the appropriate
control mode. ( 8)
• If this does not solve the problem, the connected Android
device does not support [AUTO MODE]. ( 23)
"NO DEVICE" or "READING" • Switch off the developer options on the Android device.
keeps flashing. • Reconnect the Android device.
• If this does not solve the problem, the connected Android
device does not support [AUTO MODE]. ( 23)
Playback is intermittent or Turn off the power saving mode on the Android device.
sound skips.
"CANNOT PLAY" • Make sure Android device contains playable audio files.
• Reconnect the Android device.
• Restart the Android device.