Combinations With Kombitools - Stihl KMA 130 R Mode D'emploi

English
to 91 dB(A) K-value for noise pressure level is
2 dB(A).
– Sound power level L
ISO 10517, ISO 22868: 86 dB(A) up
to 102 dB(A) K-value for sound power level is
2 dB(A).
– Vibration value a
hv
with ISO 8662, ISO 10517, ISO 11789,
ISO 20643, ISO 22867
• Control handle: 1.5 m/s² up to 5.0 m/s². K-
value for vibration level is 2.0 m/s².
• Loop handle:
• 2.0 m/s² up to 5.0 m/s². K-value for vibration
level is 2 m/s².
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools. Depending on the type of usage,
the vibrations that actually occur may differ from
the values quoted. The vibration values quoted
may be used for an initial assessment of the
user's exposure to vibrations. The actual expo‐
sure to vibrations has to be estimated. This proc‐
ess may also take into account times during
which the electric power tool is switched off and
times during which it is switched on but running
off load.
For further details on compliance with Vibration
Directive 2002/44/EC visit www.stihl.com/vib
18.3 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
19.2 STIHL FS-KM: Combinations of Cutting Attachments, Deflectors and Car‐
rying Systems
A combination of KombiEngine and STIHL FS-KM may be used with the following cutting attachments:
Cutting attachment
– PolyCut 28-2
Mowing head with 2.4 mm
diameter "round, silent"
mowing line:
– AutoCut 25-2 mowing head
– AutoCut 27-2 mowing head
– AutoCut C 26-2 mowing
head
– DuroCut 20-2 mowing head
– FixCut 31-2 mowing head
– SuperCut mowing head
20-2
Mowing head with 2.7 mm
diameter "round, silent"
mowing line:
– AutoCut 36-2 mowing head
30
to ISO 3744,
wA
measured in accordance
Deflector
– Guard for
mowing heads
– Universal
deflector with
skirt and line
limiting blade

19 Combinations with KombiTools

For information on compliance with the REACH
regulation see www.stihl.com/reach.
19 Combinations with Kombi‐
Tools
19.1 KombiTool mounting options
The following KombiTools may be mounted:
– STIHL BG-KM: Blower
– STIHL BG-KM: Cultivator
– STIHL FCB-KM: Edger
– STIHL FCS-KM: Edger
– STIHL FH-KM 145°: Scrub cutter
STIHL FS-KM: Brushcutter
– Use the STIHL FS-KM KombiTool with
mounted barrier bar only,
– Use the STIHL FS-KM KombiTool in the
specified combinations only,
– STIHL HL-KM 0°: Long reach hedge trimmer
– STIHL HL-KM 145°: Long reach hedge trim‐
mer
– STIHL HT-KM: Pole pruner
– STIHL KB-KM: Bristle brush
– STIHL KW-KM: Sweeper drum assembly
STIHL RG-KM: Weeder
– Use the STIHL RG-KM KombiTool with
mounted barrier bar only,
– STIHL SP-KM: Harvester
Barrier bar at the Carrying system
KombiEngine
– required – Shoulder strap
– Full harness
– STIHL AR battery together
– Battery belt with atta‐
– Battery belt with strap and
– Carrying system with built-
6.2.
19.2.
6.2.
with the support cushion
ched "AP belt bag with con‐
necting cable" together with
the shoulder strap
attached "AP belt bag with
connecting cable" together
with the support cushion
in "AP belt bag with connec‐
ting cable" together with the
support cushion
0458-805-9621-B