Setting Date And Time - GGM gastro POP434E Mode D'emploi

Setting date and time

The day of the week is displayed in format 1... 7 (number 1 corresponds to Monday), the time is displayed in 24 hour
format (hours:minutes).
To set the day of the week, operate as follows:
1. Ensure that no cooking cycles or other procedures are in progress.
2. Hold the "CLOCK" key pressed down for 1 s: the LED "CLOCK" will switch on and the bottom of the "UPPER"
display will show the day of the week and the time; the day will flash.
3. Press and release the "INCREASE" key or the "DECREASE" key within 15 s to set the day.
To set the hour, operate as follows:
4. Press and release the "CLOCK" key when setting the day of the week: The hour value will flash.
5. Press and release the "INCREASE" key or the "DECREASE" key within 15 s to set the hour.
To set the minutes, operate as follows:
6. Press and release the "CLOCK" key when setting the hour: the minutes value will flash.
7. Press and release the "INCREASE" or the "DECREASE" key within 15 s to set the minutes.
To leave procedure, operate as follows:
8. Press and release the "CLOCK" key when setting the minutes: the LED "CLOCK" will switch off and the
appliance will leave procedure.
To prematurely leave procedure, operate as follows:
9. Do not operate for 15 s (any changes will be saved).
65