Appliance Manual Switching On/Off; Cooking Cycle Start Up; Interrupting The Cooking Cycle; The Displays - GGM gastro POP434E Mode D'emploi

Appliance manual switching on/off

To manually switch on/off, operate as follows:
1. Ensure that no procedures are in progress.
2. Hold the "SWITCH ON/OFF" key pressed down for 1 s.
When the appliance is powered it returns to the same status it had in the moment when the power supply was interrupted.
In addition it is possible to switch the appliance off via the multi-functional input, if the appliance has been switched off via
activation of the multi-functional input, it will not be possible to switch it on manually (until the input is de-activated).

Cooking cycle start up

To start up the cooking cycle, operate as follows:
1. Ensure that the cooking timer is set, that the appliance is on and that no other procedures are in progress.
2. Press and release the "START/STOP" key: the LED "TIMER" will light up and the bottom of the "UPPER" DISPLAY
will show the remaining time of the cooking timer.

Interrupting the cooking cycle

To interrupt the cooking cycle, operate as follows:
1. Ensure that no procedures are in progress.
2. Hold the "START/STOP" key pressed down for 1 s: the buzzer will be activated for 3 s, the LED "TIMER" will go off
and the bottom of the "UPPER" display will flash "End" for 3 s.

The displays

The top of the "UPPER" display
•
If the appliance is on, the top of the "UPPER" display will show the oven chamber temperature;
•
If a cooking cycle is in progress, the top of the "UPPER" display will show the oven chamber temperature.
•
If the "programmed weekly switch on" function has been activated, the top part of the "UPPER" display will be switched
off.
•
If the appliance is off, the top part of the "UPPER" display will be off.
The bottom of the "UPPER" display
•
If the appliance is on, the bottom of the "UPPER" display will show the cooking timer information.
•
If a cooking cycle is in progress, the bottom of the "UPPER" display will show the remaining time on the cooking timer.
•
If the "programmed weekly switch on" function has been activated, the bottom part of the "UPPER" display will show
the switch on time for the next programmed weekly switch on.
The top of the "LOWER" display
•
If the appliance is on, the top of the "LOWER" display will alternate between showing the power supplied to the top
element of the oven and that supplied to the bottom for 10 s;
•
If a cooking cycle is in progress, the top of the "LOWER" display will alternate between showing the power supplied to
the top element of the oven and the power supplied to the bottom for 10 s;
•
If the "programmed weekly switch on" function has been activated, the top part of the "LOWER" display will be switched
off.
The bottom of the "LOWER" display
•
If the appliance is on, the bottom of the "LOWER" display will show the cooking timer information.
•
If the "programmed weekly switch on" function has been activated, the bottom part of the "LOWER" display will be
switched off.

Switching the buzzer off

To switch the buzzer off, operate as follows:
1. Ensure that no procedures are in progress.
2. Press and release any key.

Oven chamber light

Preliminary indications
Pushing and releasing the "DECREASE" (7) key will trigger the oven chamber light to switch on (until the key is pressed and
released again or until the appliance is switched off).
Switching on the oven chamber light
To switch the oven chamber light on, operate as follows:
1. Ensure that no procedures are in progress.
2. Push and release the "DECREASE" (7) key: the oven chamber light will come on (until the key is pressed and released
again or until the appliance is switched off).