Care And Maintenance - Spectronics Marksman II Série Mode D'emploi

ADDITIONAL APPLICATIONS
HYDRAULIC SYSTEMS: Partially blocked or bypassed valves in
high-pressure hydraulic systems can be difficult and costly to find
with conventional methods. Since hydraulic systems employ very
high pressures, the intensity of the ultrasonic sound given off by an
internal leak is extremely high and easily detected by the receiver.
Use the hollow air probe, solid contact probe or use the
receiver alone.
WATER LEAKS IN ROOFS, WINDOWS OR DOORS: Place the
activated emitter (if equipped) below the suspected leak area.
Check the suspected part of the roof, window or door with the
receiver to isolate where the leak originates. This will also aid in the
detection of any leaks in the area. Use the hollow air probe or
use the receiver alone. (See figures below.)
Receiver
Emitter

CARE AND MAINTENANCE

To clean exterior surfaces, wipe with a soft damp cloth.
When the battery LED flashes, the batteries are near the end of
their useful life and will soon have to be replaced. See Batteries
(Changing/Replacing/Disposal) on page 7.
20