Eu Declaration Of Conformity - Spectronics Marksman II Série Mode D'emploi

EU DECLARATION OF CONFORMITY

This declaration is issued under the sole responsibility of the manufacturer
Spectronics Corporation. The object of the declaration is to certify that this
equipment, designed and manufactured by Spectronics Corporation, is in
conformity with the relevant Community harmonization legislation. It has been
constructed in accordance with good engineering practice in safety matters
in force in the Community and does not endanger the safety of persons,
domestic animals or property when properly installed and maintained and
used in applications for which it was made.
Equipment Description: Ultrasonic Leak Detector (with integrated laser
pointer)
Model Number: SPI-MDT
Applicable Directives:
• 2014/30/EU General EMC
• 2011/65/EU RoHS
Applicable Standards:
Safety:
• EN 61010-1:2010 Safety requirements for electrical equipment for
measurement, control, and laboratory use. General requirements.
• IEC 60825-1:2014 Safety of Laser Products - Part 1: Equipment
Classification and requirements.
Emissions: CISPR 11/EN 55011:2009 (+A1:2010) Emission standard for
industrial, scientific, and medical (ISM) radio RF equipment (Class B).
Immunity: EN 61326-1:2013 Edition 2.0 (EMC - Measurement, Control
& Laboratory Equipment) Immunity per Table A.1 - Portable Test and
Measurement Equipment.
RoHS: EN 50581:2013 Technical documentation for the assessment of
electrical and electronic products with respect to the restriction of hazardous
substances.
CE Implementation Date: April 26, 2016
ANY QUESTIONS RELATIVE TO THIS DECLARATION OR TO THE
SAFETY OF PRODUCTS SHOULD BE DIRECTED, IN WRITING, TO THE
AUTHORIZED REPRESENTATIVE AT THE ADDRESS BELOW.
2