Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
7
Remote controller button functions
Main display
(8) Setting button
(9) Left button
(12) Fan speed
shortcut button
(1) ON/OFF button
Use to turn ON/OFF the indoor unit.
(2) Function buttons
Use to select the operation mode or to set the
temperature and fan speed on the Main display.
Use to select items on other screens.
(3) MENU button
Use to bring up the Main menu.
(4) RETURN button
Use to return to the previous screen.
(5) SELECT button
Use to jump to the setting screen or to save the
settings.
(6) Operation indicator
Stays lit during normal operation. Blinks during
startup and when an error occurs.
(7) Touch panel & Backlit full color LCD
Dot display. When the backlight is off, pressing
any area turns the backlight on and it will stay lit
for a certain period of time depending on the
screen. Performing any button operation keeps
the backlight on.
(8) Setting button
Use to bring up the Main menu.
When the menu operation is locked, an
administrator password is required.
(9) Left button
Use to switch the setting items in the following
order: louver, ventilation, vane, fan speed,
operation mode, and preset temperature.
(10) Right button
Use to switch the setting items in the following
order: preset temperature, operation mode, fan
speed, vane, ventilation, and louver.
Menu screen
(6) Operation indicator
(7) Touch panel & Backlit
full color LCD
(11) Up/Down buttons
(4) RETURN button
(3) MENU button
(10) Right button
(13) HOLD button
(1) ON/OFF button
(11) Up/Down buttons
Use to change the contents of the setting
selected in (9) and (10) above.
(12) Fan speed shortcut button
Use to directly access the fan speed settings
screen.
(13) HOLD button
Press to enable/disable the HOLD function.
Pressing the Setting button will bring up the Main
menu as shown below.
Operation menu *1
Timer menu *1
Energy saving menu *1
Initial setting menu *2*3
Maintenance menu *1
Service menu *2*3
*1 Refer to the Instructions Book in the CD-ROM
for details.
*2 Explained in this manual.
*3 If no buttons are pressed for 10 minutes on the
initial setting screens, or 2 hours on the service
screens (10 minutes on some screens), the
screen will automatically return to the Main
display. Any settings that have not been saved
will be lost.
The available items on the menu depend on the
connected indoor unit model. For items not
described in the manuals that are enclosed with
the MA Touch Remote Controller, refer to the
manuals that came with the air conditioning units.
Note: When the backlight is off, pressing any area
turns the backlight on and does not perform
its function.
– 15 –
(2) Function buttons
(5) SELECT button
Publicité
Table des Matières
