Technical Information; Environment Concerns - Zanussi ZDT16003FA Notice D'utilisation

• The indicators of function buttons (A)
and (C) go off.
• The indicator of function button (B) con-
tinues to flash.
• The display shows the setting of the rinse
aid dispenser.

Technical information

Dimensions
Electrical connection
Water supply pressure
1)
Water supply
Capacity
Power consumption
1) Connect the water inlet hose to a water tap with a 3/4'' thread.
2) If the hot water comes from alternative sources of energy, (e.g. solar panels, aeolian energy), use the hot
water supply to decrease energy consumption.

Environment concerns

The symbol on the product or on its
packaging indicates that this product may not
be treated as household waste. Instead it
should be taken to the appropriate collection
point for the recycling of electrical and
electronic equipment. By ensuring this product
is disposed of correctly, you will help prevent
potential negative consequences for the
28
Off
On
Width / Height / Depth (mm)
Refer to the rating plate.
Voltage
Frequency
Min. / max. (bar / MPa)
Cold water or hot water
Place settings
Left-on mode
Off-mode
4. Press function button (B) to change the
setting.
5. Deactivate the appliance to confirm the set-
ting.
6. Adjust the released quantity of rinse aid.
7. Fill the rinse aid dispenser.
2)
environment and human health, which could
otherwise be caused by inappropriate waste
handling of this product. For more detailed
information about recycling of this product,
please contact your local council, your
household waste disposal service or the shop
where you purchased the product.
• Discard correctly the packaging material. Re-
cycle the materials with the symbol
596 / 818 - 898 / 555
220-240 V
50 Hz
(0.5 / 0.05 ) / (8 / 0.8 )
max. 60 °C
12
0.99 W
0.10 W
.
www.zanussi.com