Preparing Cappuccino And Latte Macchiato - Siemens TK 91 N 01 Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

en
If hot water is required immediately after
drawing off steam, first cool the appliance
by pressing button
appliance gives off stem into the drip tray
12.
Frothing or warming milk
Danger of scalding
!
The steam is very hot. Only grasp the
frothing attachment by the plastic part.
● Firmly slide together the frothing
attachment 9 (Fig. 4). There must be no
gaps between the individual components.
● Push the frothing attachment 9 firmly onto
the adapter 8 on the steam pipe 7 (Fig.
5).
● Dip the tube into the vessel containing the
milk.
● Set the selector on the frothing
attachment 9 to
milk) as desired (Fig. 5).
● Place a cup or a glass under the nozzle
of the frothing attachment 9.
● Press the steam button
● As soon as
Steam
alternately in the display, press the steam
button
once more. The milk is drawn
h
into the appliance, heated, and, if
(frothed milk) is selected, frothed.
● To end the process, press the steam
button
. The appliance will briefly emit
h
steam.
The appliance will be ready to provide
steam for around minutes.
reappear in the display.
Tip: You can use the selector on the
frothing attachment 9 to vary the milk froth
and the temperature by gently rotating it
between
and
C
c
(hotter) settings regulate the temperature of
the steam (Fig. 5).
You should preferably use cold milk with a
fat content of 1.5 %.
16
(hot water), the
g
(frothed milk) or
c
.
h
and
flash
ready
will then
Ready
. The
(cooler) to
C
Info: Clean the frothing attachment 9
immediately after it has cooled down. Dried
residues are difficult to remove.
See section "Care and daily cleaning".
Preparing cappuccino and
latte macchiato
With this appliance, preparing excellent
cappuccino or latte macchiato is simplicity
itself.
To prepare cappuccino
● Push the frothing attachment 9 onto
the adapter 8 and set the selector to
(frothed milk).
● Dip the tube into a vessel containing milk.
● Position a large cup under the coffee
dispenser 14, and direct the nozzle of the
frothing attachment 9 into the cup.
(hot
C
● Place the Nespresso-capsule on the
lit balcony 16, with the membrane
downwards (Fig. 2).
● Press the button
After a short time, an optimum mix of
frothed milk and coffee will automatically
flow into the cup.
c
Info: You can halt the dispensing of milk or
coffee respectively at any time by pressing
the button
macchiato).
To prepare latte macchiato
● Push the frothing attachment 9 onto
the adapter 8 and set the selector to
(frothed milk).
● Dip the tube into a vessel containing milk.
● Remove the small drip tray 11.
● Place a large glass under the coffee
dispenser 14 and direct the nozzle of the
c
frothing attachment 9 into the glass.
(cappuccino).
c
(Cappuccino) or
c
c
(latte
d
c

Publicité

Table des Matières
loading

Table des Matières