Important Safety Instructions; Specific Safety Rules - Milwaukee 49-24-0280 Manuel De L'utilisateur

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

IMPORTANT SAFETY INSTRUCTIONS

READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS.
Failure to heed all warnings listed below, may result in electric shock,
fire and/or serious personal injury.
KEEP THESE INSTRUCTIONS.
1.
Read these instructions.
2.
Keeps these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near
water. Never immerse the apparatus
in liquid or allow a liquid to flow inside
the apparatus. Water entering an ap-
paratus will increase the risk for elec-
tric shock.
6.
Clean only with dry cloth. Certain
cleaning agents and solvents are harm-
ful to plastics and other insulated parts.
Some of these include: gasoline, tur-
pentine, lacquer thinner, paint thinner,
chlorinated cleaning solvents, ammo-
nia and household detergents contain-
ing ammonia. Clean dust and debris
from vents. Keep the apparatus handle
clean, dry and free of oil or grease.
7.
Do not block any ventilation open-
ings. Install in accordance with the
manufacturer's instructions.
8.
Do not install near any heat
sources such as radiators, heat reg-
isters, stoves, or other apparatus (in-
cluding amplifiers) that produce heat.
9.
Do not defeat the safety purpose
of the polarized or grounding-type
plug. A polarized plug has two blades
with one wider than the other. A ground-
ing type plug has two blades and a
third grounding prong. The wide blade
or the third prong are provided for your
safety. If the provided plug does not fit
into your outlet, consult an electrician
for replacement of the obsolete outlet.
10. Protect the power cord from be-
ing walked on or pinched particu-
larly at plugs, convenience receptacles,
and the point where they exit from the
apparatus. Do not abuse the cord.
Never use the cord to carry the radio
or pull the plug from an outlet. Keep
cord away from heat, oil, sharp edges
WARNING!
or moving parts. Replace damaged
cords immediately. Damaged cords in-
crease the risk of electric shock and
may create a fire.
11. Use only attachments/accesso-
ries specified by the manufacturer.
12. Unplug this apparatus during light-
ning storms or when unused for
long periods of time.
13. Refer all servicing to qualified ser-
vice personnel. Servicing is required
when the radio has been damaged in
any way, such as power-supply cord
or plug is damaged, liquid has been
spilled or objects have fallen into the
radio, the radio has been exposed to
rain or moisture or does not operate
normally. Service or maintenance per-
formed by unqualified personnel could
result in a risk of injury.
14. A battery operated radio with in-
tegral batteries or a separate bat-
tery pack must be recharged only
with the specified charger for the
battery. A charger that may be suit-
able for one type of battery may create
a risk of fire when used with another
battery.
15. Use battery operated radio only
with specifically designated bat-
tery packs. Use of any other batter-
ies may create a risk of fire.
16. When battery pack is not in use,
keep it away from other metal ob-
jects like: paper clips, coins, keys,
nails, screws, or other small metal
objects that can make a connec-
tion from one terminal to another.
Shorting the battery terminals together
may cause sparks, burns, or a fire.
17. Avoid body contact with grounded
surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
2
18. Do not use any adaptor plugs.
19. When operating a radio outside,
use an outdoor extension cord
marked "W-A" or "W". These cords
are rated for outdoor use and reduce
the risk of electric shock.

SPECIFIC SAFETY RULES

1.
Maintain labels and nameplates. These carry important information. If unreadable
or missing, contact a MILWAUKEE service facility for a free replacement.
2.
This radio is designed to be powered by a standard 120 volt AC line or AC
generator. It may also be powered using a 12, 14.4, 18 or 28 volt
pack. Do not attempt to use with any other voltage or power supply.
3.
WARNING: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
Federal
Communications
Commission
stallation. This equipment generates, uses and can radiate radio frequency energy and,
if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications.
However, there is no guarantee that interference will not occur in a particular installa-
tion. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
Symbology
Double Insulated
Volts Alternating Current
Amps
Hertz
20. Never disassemble the radio or try
to do any rewiring on the radio's
electrical system.
21. Do not expose this apparatus to
dripping and splashing, or place
objects filled with liquids on this
unit.
MILWAUKEE
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential in-
Underwriters Laboratories, Inc.
Federal Communications
Commission
Presence of important operating
instructions.
Caution. Risk of electric shock.
3
battery

Publicité

Table des Matières
loading

Table des Matières