Declaration Of Conformity - Chicco 06626 Mode D'emploi

Reduc- - Presence of obstacles,
tion of metal structures, reinforced
the op- concrete walls, etc. inter-
erating posed between the Baby
area unit (transmitter) and
the parent unit (receiver)-
- Baby unit Alkaline bat-
teries and/or parent unit
lithium-ion battery almost
flat.
Electro- Electro-static or electro-
static magnetic interference due
or elec- to electrostatic or electro-
tromag- magnetic fields emitted
netic by other electrical equip-
noise ment: e.g. domestic appli-
ances, cellular or cordless
phones, etc.
Pres- - Units are too close to-
ence of gether.
hissing - Parent unit (receiver)
or whis- volume too high.
tling
The - The baby is too far away
parent from the Baby unit (trans-
unit (re- mitter).
ceiver) - Parent unit volume level
emitting too low.
weak
sounds

DECLARATION OF CONFORMITY:

Mod. 06626
Artsana S.p.A. hereby declares that this product is in conformity with the essential
requirements and the related dispositions established by directive 1999/5/CE. A
copy of Declaration of Conformity with European Directive 1999/5/EC is available
at: www.chicco.com - Products Section. According to European Commission
decision N ° 2000/299/EC of 06/04/2000, the frequency band used by this
product is harmonised in all EU countries; therefore, this is a class 1 product and
can be freely used in all countries of the European Community.
- Move units closer together or relocate
the units themselves in order to reduce
the number of obstacles, metal struc-
tures, reinforced concrete walls, etc.
interposed between them.
- Replace in the Baby unit Alkaline bat-
teries and/or charge lithium-ion battery
in the parent unit.
Identify and, if possible, eliminate the
cause of interference.
- More units further apart.
- Lower parent unit (receiver) volume,
pressing
the volume adjustment button -(5b).
- Move the Baby unit (transmitter) within
1-1.5m away from the child.
- Increase the volume level on the parent
unit pressing
the + volume adjustment button (5a).
42