Publicité
Les langues disponibles
Les langues disponibles
SETTING ADJUSTMENT
1. Clock Setting
Press and hold
and
to set the hour and minute. To submit clock setting, press the
over 10 seconds the setting will be automatically submitted.
2. Power Save Mode Setup
MULTICLIN is featured a power saving mode to reduce electrical power consumption when not in use.
Once the setting is completed the power save function would turn the product on and off each day
according to your time settings.
Setting Powersave Start and End Time:
1) Press & hold
2) Powersave Start Setting: Press
Press & hold
3) Powersave End Setting: "END" on LCD will blink. Press
adjust minute. Press & hold
IMPORTANT
The LCD screen will show
will be orange.
IMPORTANT
The LCD screen will show
will be green.
3. Enable and Disable Powersave:
Press the
button alternatively to change the state of Powersave. Sitting on the seat when in
Powersave mode the product will restore to regular operation and re-enter Powersave mode on the next
setting start time.
4. Silent Mode
Press and hold
button for over 3 seconds to enable beeping sound, and repeat to return silent
mode.
OPERATION
button for over 3 seconds until the numbers on the screen flash. Use button
for 3 seconds. "START" on LCD will blink.
to adjust hour. Press
button to finish the Start Time setting.
button to finish the End Time setting.
when entering Powersave mode and the Powersave LED on the seat
when not entering Powersave mode and the Powersave LED on the seat
button or idle
to adjust minute.
to adjust hour. Press
11
10
to
Publicité
Chapitres
